EV Battery Thermal Management
 EV Battery Thermal Management
 EV Battery Thermal Management

Municipal Vehicles eBTM (BCS)

> OEM/ODM/Customized Available
> BTMS Word Leader Manufacture
> IATF 16949/ISO9001 2015/ISO 14001 Quality Control Certification
Battery Thermal Management System Development:

For a Sustainable Green Future:

Cities need to continue to reduce their CO2 emissions and reduce their dependence on fuel-powered transport vehicles. However, there is still a lot of potential as well as room for development in municipal vehicles. Reducing noise and emissions can have a positive impact on people's living conditions if vehicles are only used over short distances. Studies have shown that fuel-fired municipal vehicles contribute to very high levels of pollutant emissions, despite their small share. They are responsible for 20% of nitrogen oxide emissions and even 52% of particulate emissions in all road traffic. So for our cities to be greener and more sustainable, the development of purely electric municipal vehicles must be accelerated.

Customized Solutions for Electric municipal vehicle:
We offer everything you need for cooling Trailer batteries: design, testing and production. For municipal vehicle, it is measured in working hours. For maximum autonomy, most of the stored electricity should be used for the primary use of the vehicle (driving, transport or work) and not for secondary uses (heating, cooling, fan drive). If the battery could also meet these demands, either the size, weight and cost would increase significantly or the autonomy would be reduced accordingly. With our customised battery cooling systems, high-quality and demanding products at the price of mass-produced products, the advantages of having us as your partner are clear to see.

The TKT battery thermal management system provides peace of mind. Because we have carried out research and development to ensure the safety and reliability of our products. Today, based on the market demand for electric commercial vehicles, TKT began researching and designing battery thermal management systems (BTMS) in 2012. In a battery cooling system, the temperature of the battery pack is kept within the right range to maintain longer mileage and service life. In general, an effective battery cooling system is necessary to ensure battery life and performance. To meet these challenges, TKT has developed a range of products to address these issues, enabling each component to operate under optimised thermal conditions, extending service life and increasing efficiency. Combining the price advantages of mass production with global leadership in providing the most advanced vehicle components.
Design Introduction:
Battery Thermal Management System Structure:

Condenser Coil, Condenser Fan, Water Tank, Water Pump, Heat Exchange, Electric Compressor, Control Panel, CAN module, Expansion Valve ect;
The condenser system will cool down the coolant, and water pump will make the coolant run inside of BCS and battery structure system to release the heat produced by battery pack.


​​​​​TKT Battery Cooling System Advantage:
▲Patent Design to make higher cooling/heating with less weight;
▲CAN Control to avoid the wrong operation to damage battery pack;
▲Precise Temperature Control (0.5 Deg.C);
▲Adopt IP67 electric parts, such as electric compressor, water pump, connectors ect;
▲Proved Quality and performance world widely;


Reliable Support and Service:
We offer you more than just our products. We are there for you every step of the way. Our technicians advise you from the very beginning and integrate our solutions perfectly into your existing systems. We also welcome all good OEMs to discuss technology and developments with us.

Why choose TKT?
We not only offer you highly professional production, in-house testing, prototyping and simulation, but also a professional partner. In addition, our battery cooling systems have been tested and certified, all in accordance with the highest safety and quality standards. Many OEMs benefit from our future-proof battery solutions, including more than 20 outstanding companies such as American ConMet and India TaTa. Join us today on the journey to a green and sustainable future.

OEM/ODM Process


If you are interested in working with TKT, please feel free to contact us.


INQUIRY
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
Contact Person:
*Email:
*Phone Number:
*Preferred Product:
*Message:
Copyright @ TKT
Technical Support : Coverweb
INQUIRY
Contact Person:
Email *
Phone No.:*
Preferred Product:*
Message*
+