Truck Battery Thermal Management System
Truck Battery Thermal Management System
Truck Battery Thermal Management System

Truck Battery Thermal Management System

> Cooling: 3KW
> Voltage: DC450-DC750V
> Customized: Dimension/Cooling/Heating
Truck Battery Thermal Management System New journey:



Truck Battery Thermal Management System New Journey:
For trucks, it is measured in working hours. For maximum autonomy, most of the stored power should be used for the primary purpose of the vehicle (driving, transporting or working) and not consumed by secondary uses (heating, cooling, fan drive). If the battery could also meet these needs, either the size, weight and cost would increase significantly, or the autonomy would decrease accordingly.

 
What is TKT doing in such a case?
What is TKT doing in such a case?
The battery cooling system is what keeps the battery pack temperature within a suitable range to maintain longer mileage and service life. The standard function is just cooling, so we call it a battery cooling system, but the TKT can make both cooling and heating functions. In general, an effective battery cooling system is a must to ensure longevity and performance. To meet these challenges, TKT has developed a range of products to address these issues, allowing each component to operate under optimized thermal conditions, extending life and increasing efficiency.

 
Main Feature Truck Battery Thermal Management System
Main Feature of Truck Battery Thermal Management System:
▲Designed Higher Cooling/Heating to make battery pack temperature to most suitable range in short time, which will guarantee the battery pack longer life;
▲Patent Design considering balance of cooling/heating capacity and weight;
▲Bigger Coolant flow to maintain battery temperature in shortest temperature;
▲CAN control to avoid wrong operation;
▲More than 10 years market prove, more than 200000 units running globally;
▲Fast OEM/Customized Design (1 month);

Truck Battery Thermal Management System design
Truck Battery Thermal Management System Design Introduction:

TKT Battery Cooling System Structure:
Condenser Coil, Condenser Fan, Water Tank, Water Pump, Heat Exchange, Electric Compressor, Control Panel, CAN module, Expansion Valve ect;
The condenser system will cool down the coolant, and water pump will make the coolant run inside of BCS and battery structure system to release the heat produced by battery pack.


 
​​​​​TKT Battery Cooling System Advantage:
Patent Design to make higher cooling/heating with less weight;
CAN Control to avoid the wrong operation to damage battery pack;
Precise Temperature Control (0.5 Deg.C);
Adopt IP67 electric parts, such as electric compressor, water pump, connectors ect;
Proved Quality and performance world widely;

Test Report:

 
Installation Cases:



  OEM/ODM Process
During the passed 24 years, TKT grows to the 100% OEM choice in China, for both bus A/C and truck refrigeration units, such as Yutong, Nanjing Golden Dragon, Xiamen Golden Dragon ect (Bus A/C), CIMC, Xinfei, Hongyu ect (Truck Refrigeration units). For the international market, TKT is the OEM for TATA Motors, TATA Marcopolo Motors, Daewoo ect, and exported to more than 85 countries with sales and service center.

If you are interested in working with TKT, please feel free to contact us.


INQUIRY
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
Contact Person:
*Email:
*Phone Number:
*Preferred Product:
*Message:
Copyright @ TKT
Technical Support : Coverweb
INQUIRY
Contact Person:
Email *
Phone No.:*
Preferred Product:*
Message*
+